The default driver settings for v2.2.18 of the for the FTDI Mac serial driver produce…
Step-by-step instructions (including useful links) for using The Gloves (ArduIMU version) STEP 1 - Preparing…
Three pairs of ArduIMU gloves for the CTM workshop. One extra pair as backup.
Because not everybody has a pair of gloves, Adam Stark has written a Gloves Simulator,…
>> https://bitbucket.org/theglovesproject/bridges
Adam Stark has written a range of what he calls “bridges” which are code examples…
Downloading and Installing Processing Processing >> http://processing.org/download/ Because the Processing bridge uses the oscP5 library…
Today Ash Dorey from Team Exile visited Kelly at Pemberton Cottage, where we took Tim…
The sparkfun order arrived today so Tom, Kelly and I spent some time finishing of…
I’ve been working away the last few days on stuff for the workshop and explaining…
The RN-42 Bluetooth module default settings are compatible with our intended use but some alternative…
This step explains how to solder the wires of your sewn wristband circuit to the…
Tom and I met at my house and cleaned up the commutation protocol implementation for…
This step explains how to connect the bend sensors to the wires that have already…
This step we will finish up the gloves. This includes: fixing the bend sensors to…
This step describes how to callibrate your ArduIMU senors (accelerometer, gyroscope and magnetometer) and save…
Once you’ve finished building your gloves you now want to connect them to something… your…
Tom and I implemented the checksum processing on Glover and found that this prevent the…
Once you’ve physically, or wirelessly connected your gloves to your computer you now want to…
Once you’ve physically, or wirelessly connected your gloves to your computer you now want to…
Interview: Three minutes with Imogen Heap at Wired 2012 from Wired.co.uk on Vimeo. Wired Underwire
Mashable BBC News New Scientist Co.Design
Notes - 6 analog inputs, but two don”t have internal pull/up resistors! - 6 BS:…
The whole team met in my lab today to prepare to for the CTD workshop. …
Met Tom in my lab to make more progress on the ArduIMU gloves. While testing…
The ArduIMU has six analogue inputs and we are currently intending to use six bend…
My goal today was to get the ArduIMU sending quaternions. I couldn’t get the official…
This is my first post my first post and the start of my first Arduino…
An Open Hardware pair of datagloves that capture movement and gestures of the hand using…
January 28 – February 1, part of the CTM festival Musicmakers Hacklab held at Kunstraum…